Intake door cable
In this manual: Intake door cable
8steps
~48min
2/5difficulty
Done 0 of 8
INTAKE DOOR CABLE : Removal and Installation
REMOVAL
- Remove instrument panel assembly. Refer to IP "Removal and Installation".
- Disconnect intake door cable from A/C control.
- Disconnect intake door cable from A/C unit assembly and remove.
INSTALLATION
Installation is in the reverse order of removal.
INTAKE DOOR CABLE : Adjustment
- Remove instrument panel assembly. Refer to IP "Removal and Installation".
- Disconnect intake door cable (1) from clamp (A).
- Set intake door lever to REC position.
- Push intake door link (2) in the direction as shown, and then carefully pulling outer cable to A/C control side, and connect clamp.
- Operate intake door lever to insure that inner cable moves smoothly.

CAUTION: When clamping the outer cable, do not move the inner cable.
Was this page helpful?