Roof antenna
In this manual: Roof antenna
~1min read
Exploded View

1. Antenna mast 2. Antenna base
Removal and Installation
REMOVAL
1. Remove the headlining. Refer to INT "Removal and Installation".
2. Disconnect the antenna cable.
3. Remove the antenna base nut.
4. Remove the antenna base from the roof panel.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: Tighten the antenna base nut to specifications.
- If the antenna base nut is less than the specified torque, it will affect the function of the antenna.
- If the antenna base nut is greater than the specified torque, it will damage the roof panel.
ANTENNA FEEDER
Feeder Layout

1. Antenna mast 2. Antenna feed 3. Clip 4. Harness connector 5. Audio unit 6. Harness connector
MID AUDIO
Was this page helpful?