Key warning lamp
In this manual: Key warning lamp
3steps
~18min
2/5difficulty
Done 0 of 3
Component Function Check
1.CHECK FUNCTION
- Select INTELLIGENT KEY of BCM using CONSULT.
- Select INDICATOR in ACTIVE TEST mode.
- Touch KEY IND or KEY ON to check that it works normally.
Is the inspection result normal?
YES >> Key warning lamp is OK.
NO >> Refer to DLK "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK KEY WARNING LAMP
Refer to MWI "Work Flow".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace harness.
2.CHECK INTERMITTENT INCIDENT
Refer to GI "Intermittent Incident".
>> Inspection End.
Was this page helpful?