Air pressure monitor
In this manual: Air pressure monitor
~1min read
AIR PRESSURE MONITOR : CONSULT Function (BCM - AIR PRESSURE MONITOR)
NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Activate and display TPMS transmitter IDs
- Display tire pressure reported by the TPMS transmitter
- Read TPMS DTCs
- Register TPMS transmitter IDs
- Test remote keyless entry keyfob relative signal strength
SELF DIAGNOSTIC RESULT
NOTE: Before performing self diagnostic result, be sure to register the ID, or else the actual malfunction may be different from that displayed on CONSULT.
Refer to BCS "DTC Index".
DATA MONITOR 
ACTIVE TEST 
WORK SUPPORT
| Support Item | Description |
| ID READ | The registered ID number is displayed. |
| ID REGIST | Refer to WT "Description". |
ECU DIAGNOSIS INFORMATION
BCM
List of ECU Reference
| ECU | Reference |
| BCM (with Intelligent Key system) | BCS "Reference Value" |
| BCS "Fail-safe" | |
| BCS "DTC Inspection Priority Chart" | |
| BCS "DTC Index" | |
| BCM (without Intelligent Key system) | BCS "Reference Value" |
| BCS "Fail-safe" | |
| BCS "DTC Inspection Priority Chart" | |
| BCS "DTC Index" |
WIRING DIAGRAM
TIRE PRESSURE MONITORING SYSTEM
Wiring Diagram




BASIC INSPECTION
Was this page helpful?