Panic alarm function does not operate
In this manual: Panic alarm function does not operate
8steps
~48min
2/5difficulty
Done 0 of 8
Diagnosis Procedure
1.CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent Key button?
YES >> GO TO 2.
NO >> Refer to DLK "Diagnosis Procedure".
2.CHECK HORN OPERATION
- Select IPDM E/R using CONSULT.
- Select HORN in ACTIVE TEST mode.
- Touch On to check that it works normally.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace the malfunctioning parts.
3.CHECK PANIC ALARM SET SETTING IN WORK SUPPORT
- Select INTELLIGENT KEY of BCM.
- Select PANIC ALARM SET in WORK SUPPORT mode.
- Check PANIC ALARM SET setting in WORK SUPPORT.
Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Set MODE 1 or MODE 3 in PANIC ALARM SET
4.REPLACE BCM
- Replace BCM. Refer to BCS "Removal and Installation".
- Confirm the operation after replacement.
Is the result normal?
YES >> Inspection End.
NO >> Check intermittent incident. Refer to GI "Intermittent Incident".
Was this page helpful?