Center console assembly
In this manual: Center console assembly
10steps
~60min
3/5difficulty
Done 0 of 10
Exploded View

1. M/T console boot (M/T models) 2. Center console assembly
Removal and Installation
REMOVAL
- Move shift selector to "N" position (CVT models or A/T models).
- Remove shift selector handle and console boot (M/T models).
- Raise parking brake lever.
- Remove center console assembly clips (A).

- Remove the center console assembly rear screws.
- Slide front seat (RH) all the way rearward and place in fully reclined position.
- Slide front seat (LH) all the way forward and tilt seatback to the full forward position.
- Raise rear right corner of center console assembly, rotating slightly, making sure to lift assembly upward over the parking brake handle.
- Disconnect harness connector from power socket and harness connector from USB/auxiliary jack (if equipped).
- Remove center console assembly.

INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?