Front power window switch
In this manual: Front power window switch
~1min read
Removal and Installation
REMOVAL
1. Remove front power window and door lock/unlock switch (RH) finisher assembly using a suitable tool (A).
Pawl

2. Disconnect the harness connector from the front power window and door lock/unlock switch (RH).
3. Separate front power window and door lock/unlock switch (1) from front power window and door lock/unlock switch (RH) finisher using a suitable tool.
CAUTION: Do not bend back the pawls on the switch finisher too far or breakage may occur.

INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?