CVT Control system
CVT Control system : system description
SYSTEM DIAGRAM

INPUT/OUTPUT SIGNAL TABLE
Sensor (or signal) |
TCM function |
Actuator |
||
|
|
|
SYSTEM DESCRIPTION
- CVT detects the vehicle driving status from switches, sensors and signals, and controls the vehicle so that the optimum shift position and shift timing may always be achieved. It also controls the vehicle to reduce shift and lockup shock, etc.
- Receives input signals from switches and sensors.
- Sends the output signal necessary for operation of solenoid valves, and evaluates the line pressure, shift timing, lockup operation, engine brake performance, etc.
- If a malfunction occurs on the electric system, activate the fail-safe mode only to drive the vehicle.
LIST OF CONTROL ITEMS AND INPUT/OUTPUT


**: If these input/output signals show errors, TCM activates the fail-safe function.
CVT CONTROL SYSTEM : Schematic


CVT Control system : fail-safe
TCM has a fail-safe mode. The mode functions so that operation can be continued even if the signal circuit of the main electronically controlled input/output parts is damaged.
If the vehicle shows following behaviors including "poor acceleration", a malfunction of the applicable system is detected by TCM and the vehicle may be in a fail-safe mode. At this time, check the DTC code and perform inspection and repair according to the malfunction diagnosis procedures.
Fail-safe function
| DTC | Vehicle behavior | Conditions of vehicle |
| P062F |
|
- |
| P0705 |
|
- |
| P0706 |
|
- |



CVT Control system : protection control
The TCM becomes the protection control status temporarily to protect the safety when the safety of TCM and transmission is lost. It automatically returns to the normal status if the safety is secured.
The TCM has the following protection control.
CONTROL FOR WHEEL SPIN 
CONTROL WHEN FLUID TEMPERATURE IS HIGH 
TORQUE IS REDUCED WHEN DRIVING WITH THE REVERSE GEAR 
REVERSE PROHIBIT CONTROL 