Differential side oil seal
Exploded View

1. Transaxle assembly 2. Differential side oil seal (left side) 3. Differential side oil seal (right side)
Front
Genuine NISSAN Matic S ATF
Removal and Installation
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
REMOVAL
- Remove the front drive shafts from the transaxle assembly. Refer to FAX "Removal and Installation".
- Remove the differential side oil seal using suitable tool.
CAUTION: When removing the differential side oil seal, be careful not to scratch the oil seal mating surfaces of the transaxle case and converter housing.
INSTALLATION
1. Drive the differential side oil seal into the transaxle case side (A) and converter housing side (B) using suitable tool to the specified dimension.
CAUTION:
- Be careful not to scratch the lip of the differential side oil seal when press-fitting it.
- Do not reuse differential side oil seal.
- Apply Genuine NISSAN Matic S ATF to the differential side oil seal lip and around the oil seal.
Dimension (C) : 1.8 +- 0.5 mm (0.071 +- 0.020 in).
Dimension (D) : 1.8 +- 0.5 mm (0.071 +- 0.020 in).

2. Install the front drive shaft. Refer to FAX "Removal and Installation".
Inspection and Adjustment
INSPECTION AFTER INSTALLATION
Check for A/T fluid leakage. Refer to TM "Inspection".
ADJUSTMENT AFTER INSTALLATION
Check the A/T fluid level. Refer to TM "Adjustment".