Auto door lock operation does not operate
In this manual: Auto door lock operation does not operate
5steps
~30min
2/5difficulty
Done 0 of 5
Diagnosis Procedure
1.CHECK AUTO LOCK SET SETTING IN WORK SUPPORT
- Select INTELLIGENT KEY of BCM using CONSULT.
- Select AUTO LOCK SET in WORK SUPPORT mode.
- Check AUTO LOCK SET setting in WORK SUPPORT.
Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Set MODE 2, MODE 3, MODE 4, MODE 5, MODE 6 or MODE 7 in AUTO LOCK SET.
2.REPLACE BCM
- Replace BCM. Refer to BCS "Removal and Installation".
- Confirm the operation after replacement.
Is the result normal?
YES >> Inspection End.
NO >> Check intermittent incident. Refer to GI "Intermittent Incident".
Was this page helpful?