Trunk lid opener handle
In this manual: Trunk lid opener handle
~1min read
TRUNK LID OPENER HANDLE : Removal and Installation
REMOVAL
1. Remove front kicking plate (LH). Refer to INT "KICKING PLATE INNER : Removal and Installation".
2. Release pawl using a suitable tool (A) and open the harness clip.
Pawl

3. Position floor carpet aside as necessary to access the trunk lid opener handle bolts.
4. Remove the trunk lid opener handle bolts.
5. Remove trunk lid opener cable from trunk lid opener handle.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- After installation, check trunk lid open/close, lock/unlock operation.
- After installation, perform the trunk lid adjustment procedure. Refer to DLK "DOOR ASSEMBLY : Adjustment".
Was this page helpful?