Dash side finisher
In this manual: Dash side finisher
2steps
~12min
1/5difficulty
Done 0 of 2
DASH SIDE FINISHER : Removal and Installation
REMOVAL
- Remove front kicking plate. Refer to INT "KICKING PLATE INNER : Removal and Installation".
- Lift up rear end of dash side finisher to disengage metal clip.
: Metal clip

3. Pull back dash side finisher to disengage dash side finisher metal clip and remove dash side finisher.
: Metal clip

INSTALLATION
Installation is in the reverse order of removal.
CAUTION: When installing dash side finisher, make sure that all metal clips are securely pressed into body panel holes.
Was this page helpful?