Glove box assembly and housing
In this manual: Glove box assembly and housing
~1min read
Removal and Installation
REMOVAL
1. Remove glove box lid.
a. Open glove box lid.
b. Pull glove box lid rearward and glove box lid hinges down and rearward to disengage, then remove the glove box lid.

c. Disconnect glove box damper (if equipped).
2. Remove glove box assembly.
a. Remove glove box assembly screws (A).
b. Pull glove box assembly rearward to disengage pawls and remove glove box assembly.
: Pawl

INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?