Vacuum lines
In this manual: Vacuum lines
2steps
~12min
1/5difficulty
Done 0 of 2
Exploded View

1. Clamp 2. Vacuum hose 3. Vacuum piping A. To brake booster B. Paint mark C. To intake manifold
Removal and Installation
REMOVAL
- Remove the air cleaner and duct assembly. Refer to EM "Exploded View".
- Remove the vacuum hose and vacuum piping.
INSTALLATION
Installation is in the reverse order of removal.
- When installing vacuum hose, insert it until its tip reaches the back-end of length (A) or further as shown.
CAUTION: Do not use lubricating oil during assembly.
(A) : 24 mm (0.95 in) or more
- Face the paint mark of vacuum hose (intake manifold side) upward to assemble.
- Face the other paint marks of vacuum hose to the vehicle front side to assemble.

Inspection
INSPECTION AFTER REMOVAL
Appearance
Check for correct assembly, damage and deterioration.
FRONT DISC BRAKE
Was this page helpful?