Cluster lid A
In this manual: Cluster lid A
3steps
~18min
2/5difficulty
Done 0 of 3
Removal and Installation
REMOVAL
- Remove steering column covers. Refer to IP "Removal and Installation".
- Remove cluster lid C. Refer to IP "Removal and Installation".
- Remove cluster lid A.

Pawl
Metal clip
a. Remove combination meter finisher and cluster lid A as an assembly by pulling rearward to release pawls and metal clips.
b. Separate cluster lid A (2) from combination meter finisher (1) by releasing the metal clips (If necessary).
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?