Center pillar upper finisher
In this manual: Center pillar upper finisher
3steps
~18min
2/5difficulty
Done 0 of 3
CENTER PILLAR UPPER FINISHER : Removal and Installation
REMOVAL
- Remove front shoulder anchor. Refer to SB "SEAT BELT RETRACTOR : Removal and Installation".
- Remove front body side welt and rear body side welt. Refer to INT "BODY SIDE WELT : Removal and Installation".
- Release center pillar upper finisher upper pawl using a suitable tool as shown.
WARNING: Do not reuse center pillar upper finisher if removed.
CAUTION: When releasing molded in pawls, follow the steps as shown to prevent finisher or clip damage.

4. Release center pillar upper finisher lower pawl using a suitable tool (A) and remove center pillar upper finisher.
: Pawl

INSTALLATION
Installation is in the reverse order of removal.
CAUTION: When installing center pillar upper finisher, make sure that pawls and are securely pressed into the body panel holes.
Was this page helpful?