Shift P Warning lamp
In this manual: Shift P Warning lamp
3steps
~18min
2/5difficulty
Done 0 of 3
Component Function Check
1.CHECK FUNCTION
- Select INTELLIGENT KEY of BCM using CONSULT.
- Select LCD in ACTIVE TEST mode.
- Touch SET P to check that it works normally.
Is the inspection result normal?
YES >> Shift P warning lamp is OK.
NO >> Refer to DLK "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK SHIFT P WARNING LAMP
Refer to TM "Component Parts Function Inspection".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace the malfunctioning parts.
2.CHECK INTERMITTENT INCIDENT
Refer to GI "Intermittent Incident".
>> Inspection End.
Was this page helpful?