Battery
In this manual: Battery
~1min read
Removal and Installation
REMOVAL
1. Disconnect the battery negative terminal (1).
CAUTION: When disconnecting, disconnect the battery negative terminal first.
2. Disconnect the battery positive terminal (2).
3. Remove the battery wedge bolt (A) and battery wedge bracket (3).
4. Remove the battery cover.
5. Remove the battery.

INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- When connecting, connect the battery positive terminal first.
- Check battery terminals for poor connection caused by corrosion.
Battery wedge bracket bolt : 17.0 N*m (1.7 kg-m, 13 ft-lb)
Battery terminal nuts : 5.4 N*m (0.55 kg-m, 48 in-lb)
Reset electronic systems as necessary. Refer to PG "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement".
SERVICE DATA AND SPECIFICATIONS (SDS)
Battery 
*: Always check with the Parts Department for the latest parts information.
Was this page helpful?