Rear pillar finisher
In this manual: Rear pillar finisher
4steps
~24min
2/5difficulty
Done 0 of 4
REAR PILLAR FINISHER : Removal and Installation
REMOVAL
- Partially remove rear body side welt. Refer to INT "BODY SIDE WELT : Removal and Installation".
- Remove rear seat cushion. Refer to SE "Removal and Installation - Seat Cushion Assembly".
- Remove the rear seat bolster. Refer to SE "Removal and Installation - Rear Seat Bolster".
- Release rear pillar finisher clips and metal clips using a suitable tool (A) and remove rear pillar finisher by pulling outward.
: Clip
: Metal clip

INSTALLATION
Installation is in the reverse order of removal.
CAUTION: When installing rear pillar finisher, make sure that clips and metal clips are securely pressed in body holes.
Was this page helpful?