Line pressure test
In this manual: Line pressure test
8steps
~48min
2/5difficulty
Done 0 of 8
Work Procedure
INSPECTION
- Check the engine oil level. Replenish if necessary. Refer to LU "Inspection".
- Check for CVT fluid leaks. Refer to TM "Inspection".
- Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temperature is 50 to 80C (122 to 176F).
- Stop the vehicle, apply the parking brake and block the tires.
- Start the engine.
- Select "Data Monitor" in "TRANSMISSION".
- Select "LINE PRESSURE".
- Measure the line pressure at both idle and the stall speed.
CAUTION: Keep brake pedal pressed all the way down during measurement.
Line pressure : TM "Line Pressure"
NARROWING-DOWN MALFUNCTIONING PARTS

Dtc/circuit diagnosis
Was this page helpful?