A/C Compressor Relief Valve Removal and Installation
In this manual: A/C Compressor Relief Valve Removal and Installation
~1min read
Removal/Installation
NOTE:
- If the A/C compressor relief valve released refrigerant to the atmosphere, determine and correct the cause of the excessive system pressure, then replace the relief valve.
- Plug the opening to keep moisture and foreign material from entering the system, and the A/C compressor oil from running out.

Torque: N-m (kgf-m, lbf-ft)
Replace
1. A/C Refrigerant - Recover
2. Vehicle - Lift
3. A/C Compressor Relief Valve - Remove
4. All Removed Parts - Install
- Install the parts in the reverse order of removal, and note these items:
- If the A/C compressor relief valve released refrigerant to the atmosphere, determine and correct the cause of the excessive system pressure, then replace the relief valve.
- Clean the mating surfaces.
- A new O-ring should be used at each fitting. Prior to installation, apply a thin coat of the same refrigerant oil used in the A/C compressor. Be sure to use the correct O-ring for refrigerant types to avoid leakage.
- Charge the system with the specified amount of refrigerant.
Was this page helpful?