Outside Air Temperature Sensor Removal, Installation, and Test
In this manual: Outside Air Temperature Sensor Removal, Installation, and Test
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation

*1: Test item
1. Front Bulkhead Cover - Remove
2. Outside Air Temperature Sensor - Remove
3. All Removed Parts - Install
- Install the parts in the reverse order of removal
Test
NOTE: Before testing the sensor, check for climate control DTCs.
Outside Air Temperature Sensor
1. Outside Air Temperature Sensor - Test

- Dip the sensor in ice water, and measure the resistance between terminals No. 1 and No. 2.
- Then pour warm water on the sensor, and check for a change in resistance.
- Compare the resistance readings with the specifications shown in the graph, the resistance should be within the specifications.
- If the resistance is not as specified, replace the outside air temperature sensor.
Was this page helpful?