Front Stabilizer Bar Removal and Installation
In this manual: Front Stabilizer Bar Removal and Installation
6steps
~36min
2/5difficulty
Done 0 of 6
Removal
1. Vehicle - Lift
2. Front Wheels - Remove
3. Engine Undercover - Removal
4. Stabilizer Link - Disconnect
- Disconnect both sides of the stabilizer link from the stabilizer bar.
5. Front Suspension Stroke Sensor - Disconnect (With Auto Leveling System)
6. Lower Arm - Remove (Driver's Side)
7. Stabilizer Bar - Remove

- Remove the bushing holders (A).
- Remove the bushings (B).
- Move the stabilizer bar (C) toward the driver's side, and remove the stabilizer bar.
NOTE: Be careful not to damage the steering gearbox.
Installation
1. Stabilizer Bar - Install

- Install the stabilizer bar (A).
NOTE: Be careful not to damage the steering gearbox.
- Install the bushings (B).
Note: Direction of installation for the bushing.
- Install the bushing holders (C).
2. Lower Arm - Install (Driver's Side)
3. Front Suspension Stroke Sensor - Connect (With Auto Leveling System)
4. Stabilizer Link - Connect
- Connect both sides of the stabilizer link to the stabilizer bar.
5. Engine Undercover - Install
6. Front Wheels - Install
7. Headlight Initial Position - Learn (With Auto Leveling System)
Was this page helpful?