Shift Solenoid Valve C Removal and Installation
In this manual: Shift Solenoid Valve C Removal and Installation
3steps
~18min
2/5difficulty
Done 0 of 3
Removal and Installation
1. Vehicle - Lift
2. Splash Shield - Remove
3. Shift Solenoid Valve C - Remove

- Remove the harness clamp (A).

- Disconnect the connector (A).

- Remove shift solenoid valve C with the O-rings (A).
4. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE:
- Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
- Be sure to use new O-rings when installing shift solenoid valve C.
- If necessary, add ATF to the proper level.
Was this page helpful?