Tuner Unit Removal and Installation
In this manual: Tuner Unit Removal and Installation
2steps
~12min
1/5difficulty
Done 0 of 2
Removal/Installation
NOTE: If you are replacing the tuner unit, write down the AM/FM radio presets (if possible), and enter them into the new tuner unit.
1. Right Rear Side Trim Panel - Remove
2. Tuner Unit - Remove

- Disconnect the connectors (A), then remove the harness clip (B).
- Remove the tuner unit.
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?