Catalytic Converter Inspection
In this manual: Catalytic Converter Inspection
2steps
~12min
1/5difficulty
Done 0 of 2
Inspection
1. TWC - Remove
- Remove the warm up TWC
- Remove the under-floor TWC
2. TWC - Inspect

This illustration shows an example (warn up TWC)
- Plug up the hole(s) (A) other than main exhaust gas route.
- Using a flashlight (B) visually check for plugging, melting, or cracking of the catalyst. Replace the TWC if any of the visible area is damaged or plugged.
Was this page helpful?