Fuel Fill Door Opener Switch Test
In this manual: Fuel Fill Door Opener Switch Test
~1min read
Test
1. Driver's Door Panel - Remove
2. Fuel Fill Door Opener Switch - Test

- Check the fuel fill door opener switch (A) according to the table.
NOTE:
- When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
- Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).
- If the result is not as specified, replace the fuel fill door opener switch.
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?