Door Lock Actuator Test
In this manual: Door Lock Actuator Test
6steps
~36min
2/5difficulty
Done 0 of 6
Test
Front Door
1. Front Door Panel - Remove
2. Front Door Lock Actuator - Test
Driver's door

Front passenger's door


- Disconnect the connector (A).
- Check the actuator operation by connecting power and ground according to the table.
NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.
- If the actuator does not operate as specified, the front door lock actuator is faulty; replace the front door latch (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Rear Door
1. Rear Door Panel - Remove
2. Rear Door Lock Actuator - Test

Left and Right Rear Door

- Disconnect the connector (A).
- Check the actuator operation by connecting power and ground according to the table.
NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.
- If the actuator does not operate as specified, the rear door lock actuator is faulty; replace the rear door latch (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?