Brake Pedal Position Switch Removal and Installation
In this manual: Brake Pedal Position Switch Removal and Installation
9steps
~54min
2/5difficulty
Done 0 of 9
Removal and Installation
1. Brake Pedal Position Switch - Remove
- Disconnect the connector (A).
- Turn the brake pedal position switch (B) counterclockwise to remove the switch from the pedal bracket (C).
- Remove the attaching piece (D).

2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
3. Brake Pedal and Brake Pedal Position Switch - Adjust
Brake Pedal Removal and Installation
Removal/Installation
1. Brake Pedal - Remove

- Disconnect the connector (A).
- Remove the wire harness clips (B).
- Remove the lock pin (C).
- Remove the clevis pin (D).
NOTE: Apply multipurpose grease to the clevis pin in the brake pedal.
- Remove the brake pedal with the bracket (E).
- Remove the brake pedal position switch (F) by turning it 45 º counterclockwise to release from bracket.
2. All Removed Parts - Install
- Install the brake pedal in the reverse order of removal.
3. Brake Pedal and Brake Pedal Position Switch - Adjust
Was this page helpful?