Rearview Camera Removal and Installation
In this manual: Rearview Camera Removal and Installation
3steps
~18min
2/5difficulty
Done 0 of 3
Removal/Installation
NOTE: The rearview camera is combined with the tailgate outer handle/lock switch.
1. Tailgate Lower Trim Panel - Remove
2. Tailgate Outer Handle/Lock Switch - Remove
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Rearview Mirror Removal and Installation
Removal/Installation
1. Camera Cover - Remove (For Some Models)
2. Harness Cover - Remove (For Some Models)

- Remove the harness cover (A).
3. Rearview Mirror - Remove
Except Auto High-Beam

Auto High-Beam

- Disconnect the connector (A). (for some models)

- Remove the screw with a TORX T20 bit.
- Slide the rearview mirror (A) rearward and off the mount (B).
4. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Receiver/Dryer Desiccant Removal and Installation
Removal/Installation

Torque: N-m (kgf-m, lbf-ft)
Replace
1. A/C Condenser - Remove
2. Desiccant - Remove
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?