Vanity Mirror Light Removal, Installation, and Test
In this manual: Vanity Mirror Light Removal, Installation, and Test
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
NOTE: The vanity mirror light is built into the sunvisor.
1. Vanity Mirror Light - Remove
Vanity Mirror Light: 1CP

- Carefully pry off the lenses (A).
- Remove the bulb(s) (B) from the vanity mirror light.
2. All Parts Removed - Install
- Install the parts in the reverse order of removal.
Test
1. Sunvisor - Remove
2. Vanity Mirror Light - Test

NOTE: When doing the vanity mirror light test, install the bulb correctly.
- Check for continuity between the terminals in each vanity mirror cover (A) position according to the table.
- If the continuity is not as specified, replace the bulb(s) or the sunvisor (B).
Was this page helpful?