Front Seat Lumbar Support Removal and Installation
In this manual: Front Seat Lumbar Support Removal and Installation
6steps
~36min
2/5difficulty
Done 0 of 6
Removal/Installation
NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
Power Lumbar Support
1. Front Seat Armrest - Remove
2. Front Seat - Remove
3. Front Seat-Back Cover/Pad - Remove
4. Front Seat Lumbar Support - Remove

- Remove the wire tie (A) fastening the lumbar support cable (B).
- Remove the nuts, and separate the lumbar support motor (C) from the seat frame (D).

- Remove the lumbar support (A) from both upper springs (B).
- Lift up the hooks of the seat frame (C), and then remove the lumbar support.
5. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Static Lumbar Support
1. Front Seat Armrest - Remove
2. Front Seat - Remove
3. Front Seat-Back Cover/Pad - Remove
4. Front Seat Lumbar Support - Remove

- Remove the lumbar support (A) from both upper springs (B).
- Lift up the hooks of the seat frame (C), and then remove the lumbar support.
5. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?