ACC Combination Switch Removal, Installation, and Test
In this manual: ACC Combination Switch Removal, Installation, and Test
2steps
~12min
1/5difficulty
Done 0 of 2
Removal/Installation
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. ACC Combination Switch - Remove
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Test
1. ACC Combination Switch - Test

- Measure the resistance between ACC combination switch 12P connector terminals No. 2 and No. 5 according to the table.
If there is no resistance in one or more positions, replace the ACC combination switch.

- Measure the resistance between ACC combination switch 12P connector terminals No. 3 and No. 4 according to the table.
If there is no resistance in one or more positions, replace the ACC combination switch.

Was this page helpful?