Door Lock Knob Switch Test
In this manual: Door Lock Knob Switch Test
9steps
~54min
2/5difficulty
Done 0 of 9
Test
Driver's Door
1. Driver's Door Panel - Remove
2. Driver's Door Lock Knob Switch - Test


- Disconnect the connector (A).
- Check for continuity between the terminals in each switch position according to the table.
- If the continuity is not as specified, the driver's door lock knob switch is faulty; replace the driver's door latch (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Front Passenger's Door
1. Front Passenger's Door Panel - Remove
2. Front Passenger's Door Lock Knob Switch - Test


- Disconnect the connector (A).
- Check for continuity between the terminals in each switch position according to the table.
- If the continuity is not as specified, the front passenger's door lock knob switch is faulty; replace the front passenger's door latch (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Rear Door
1. Rear Door Panel - Remove
2. Rear Door Lock Knob Switch - Test

Left and Right Rear Door

- Disconnect the connector (A).
- Check for continuity between the terminals in each switch position according to the table.
- If the continuity is not as specified, the rear door lock knob switch is faulty; replace the rear door latch (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?