ATF Hose Removal and Installation
In this manual: ATF Hose Removal and Installation
~1min read
Removal
1. ATF Hose - Remove
- Remove the ATF hose as needed.

Installation
NOTE: When installing the hose clips, make sure they do not interfere with the surrounding parts.
1. ATF Hose - Install
- Connect the ATF hoses over the ATF lines with the clamps at the appropriate points in reference to the following list.

- Align the yellow paint mark (J) on the ATF hose end with the paint mark (K) on the ATF warmer.
- Align the blue paint mark (M) on the ATF hose end with the paint mark (N)on the ATF line.

2. ATF - Level Check
Was this page helpful?