Ignition Coil and Spark Plug Removal and Installation
In this manual: Ignition Coil and Spark Plug Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
1. Engine Cover, Ignition Coil, and Spark Plug - Remove
- Remove the engine cover (A).

- Disconnect the connectors (B).
- Remove the ignition coils (C).
- Remove the spark plugs (D).
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
NOTE: When the spark plugs install, apply a small amount of anti-seize compound to the spark plug threads, and screw the spark plugs into the cylinder head, finger-tight, then tighten the spark plugs to the specified torque.
3. Maintenance Minder - Reset (With Maintenance Minder System)
- If the Maintenance Minder required to replace the spark plugs, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").
Was this page helpful?