A/C System Contamination Inspection
In this manual: A/C System Contamination Inspection
~1min read
Inspection
NOTE:
- If the A/C compressor failure is diagnosed, always use this inspection to check the extent of contamination in the A/C system.
- The parts illustrations are sample. External appearance may vary from model to model.
1. A/C System Contamination - Inspect
Remove a part from the related parts as described in the table. Then, swab inside the part with a cotton swab to see if there is metal, dark grey or black residue.


Replacement
NOTE: The parts illustrations are sample. External appearance may vary from model to model.
1. A/C Components - Replace
Repair Procedure A

Replace the following parts:
- A/C compressor (A)
- Discharge hose (B)
Repair Procedure B

Replace the following parts:
- A/C compressor (A)
- Discharge hose (B)
- A/C condenser (C)
Repair Procedure C

Replace the following parts:
- A/C compressor (A)
- Discharge hose (B)
- A/C condenser (C)
- Receiver line (D)
Repair Procedure D

Replace the following parts:
- A/C compressor (A)
- A/C condenser (B)
- Expansion valve (C)
- Evaporator core (D)
- All A/C hoses and lines
Was this page helpful?