Front Passenger's Seat Rail Removal and Installation
In this manual: Front Passenger's Seat Rail Removal and Installation
5steps
~30min
2/5difficulty
Done 0 of 5
Removal/Installation
NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. Front Passenger's Seat - Remove
2. Front Seat Frame - Remove
3. Front Passenger's Weight Sensor Unit - Remove
4. Front Passenger's Seat Rail - Remove
Power seat (with ventilated seat)

Power seat (without ventilated seat)

Manual seat

- Disconnect the connectors (A), and remove the clip (B).
(with weight sensor)
- Disconnect the connector (C), and remove the clip (D).
(with power seat)
- Remove the harness clips (E).

- Remove the cushion spring (A).

- Remove the nuts, and then remove the front passenger's seat rail (A).
5. All Removed Parts - Install

- Install the parts in the reverse order of removal.
NOTE: Make sure to install the spacers and collars as shown.
6. Front Passenger's Weight Sensor - Initialize
Was this page helpful?