Second Row Seat Armrest Panel Removal and Installation
In this manual: Second Row Seat Armrest Panel Removal and Installation
5steps
~30min
2/5difficulty
Done 0 of 5
Removal/Installation
1. Second Row Seat - Remove (Left Side)
2. Second Row Seat Recline Inner Cover - Remove (Left Side)
3. Second Row Seat Armrest - Remove
4. Second Row Seat Armrest Panel - Remove

- Remove the seat-back board cover (A).

- Remove the retainer (A) from the lance tabs (B).
NOTE:
- Use the appropriate tool from trim tool or flat-tip screw driver.
- Take care to prevent lance tab damage when disengaging the retainer.
- Lance tabs are at the edge of the seat-back.

- Remove the lower area of the second row seat armrest panel (A), and remove the headrest guides (B).

- Remove the second row seat armrest panel (A).

- Remove the armrest panel cover (A) from the second row seat armrest panel (B).
5. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?