Injector Control Module Removal and Installation
In this manual: Injector Control Module Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
1. 12 Volt Battery Terminal - Disconnect
2. Engine Cover - Remove
3. Injector Control Module Cover - Remove

- Remove the bolts (B).
- Remove injector control module cover A.
4. Injector Control Module - Remove

- Disconnect the connectors (A), then remove the injector control module (C).
- Remove injector control module cover B from the injector control module.
5. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?