Exterior Lights Bulb Removal and Installation
In this manual: Exterior Lights Bulb Removal and Installation
9steps
~54min
2/5difficulty
Done 0 of 9
Removal/Installation
Headlight (Low Beam) (Without LED Headlight)
1. Front Bulkhead Cover - Remove
2. Air Intake Tube - Remove (Left side)
3. Headlight (LOW Beam) - Remove
Headlight (LOW Beam): 55 W

- Disconnect the connector (A).
- Turn the bulb (B) counterclockwise to remove it from the housing.
4. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Headlight (High Beam)
1. Front Bulkhead Cover - Remove
2. Air Intake Tube - Remove (Left Side)
3. Headlight (High Beam) - Remove
Headlight (High Beam): 60 W

- Disconnect the connector (A).
- Turn the bulb (B) counterclockwise to remove it from the housing.
4. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Front Turn Signal Light
1. Front Turn Signal Light Bulb - Remove
Front Turn Signal Light: 21W
Front Parking/Turn Signal light: 28W/8W

- Remove the front bumper side trim (A).
- Disconnect the connector (B).
- Turn the bulb socket (C) counterclockwise to remove the bulb (D).
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Back-Up Light
1. Back-Up Light Bulb - Remove
Back-Up Light: 21 W

- Disconnect the connector (A).
- Turn the bulb socket (B) counterclockwise to remove the bulb (C).
2. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Rear Turn Signal Light
1. Taillight - Remove
2. Rear Turn Signal Light Bulb - Remove
Rear Turn Signal Light: 21 W

- Turn the bulb socket (A) counterclockwise to remove the bulb (B).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?