Water Pump Inspection
In this manual: Water Pump Inspection
~1min read
1. Timing Belt - Remove
2. Water Pump - Inspect

- Turn the water pump pulley counterclockwise, and check that it turns freely. If it does not turn freely, replace the water pump.
NOTE: When you check the water pump, you may see a small amount of "weeping" from the bleed holes (A). This is normal.
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
4. Maintenance Minder - Reset (With Maintenance Minder System)
- If the Maintenance Minder required to inspect the water pump, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").
Was this page helpful?