Front Bumper Removal and Installation
In this manual: Front Bumper Removal and Installation
6steps
~36min
2/5difficulty
Done 0 of 6
Removal/Installation
1. Front Bulkhead Cover - Remove
2. Front Wheel Arch Protector - Remove
3. Front Grille Trim - Remove
4. Front Bumper - Remove

- Remove the bolts (A, B), the screws (C), and the clips (D).

- Release the hooks (A).

- Pull out the front bumper (A) at the wheel arch area to release it from the hooks (B) on the side spacer.

- With the help of an assistant, while pulling the front bumper (A) away from the side spacer (B), release the bumper from the hooks (C) on the upper beam.

- With the help of an assistant, remove the front bumper (A).
- Disconnect the connectors (B). (for some models).
5. Front Bumper Spacer - Remove

- If necessary, remove the screws, and then remove the front bumper spacer (A).
6. Front Bumper Cap - Remove (For Some Models)

- If necessary, remove the screws, and then remove the bumper cap (A).
7. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?