Power Tailgate Inside Switch Removal and Installation
In this manual: Power Tailgate Inside Switch Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
1. Power Tailgate Inside Switch Panel - Remove

- Remove the power tailgate inside switch panel (A).
- Disconnect the connector (B).
2. Power Tailgate Inside Switch - Remove

3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Power Tailgate Pinch Sensor Removal and Installation
Removal and Installation
1. Tailgate Lower Trim Panel - Remove
2. Power Tailgate Pinch Sensor - Remove

- Disconnect the connector.
- Remove the power tailgate pinch sensor (A).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Power Window Master Switch Removal and Installation
Removal/Installation
NOTE: If the switch is replaced, reset the power window control unit. If the original switch is installed, confirm that the power window works properly.
1. Driver's Door Armrest - Remove
2. Power Window Master Switch - Remove

3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
4. Power Window Control Unit - Reset
Was this page helpful?