Transmission Housing Selector Control Shaft Oil Seal Replacement
In this manual: Transmission Housing Selector Control Shaft Oil Seal Replacement
~1min read
Replacement
1. Selector Control Shaft Oil Seal - Remove

2. Selector Control Shaft Oil Seal - Install

- Install the oil seal (A) to a depth (B) of 0.3-1.0 mm (0.012 -0.039 in) below the transmission housing surface (C) using the 15 x 135L driver handle and the 22 x 24 mm attachment.
Special Tool Required

- Attachment, 22 x 24 mm 07746-001A800

- Driver Handle, 15 x 135L 07749-0010000
Was this page helpful?