Driver's Power Tailgate Switch Test
In this manual: Driver's Power Tailgate Switch Test
2steps
~12min
1/5difficulty
Done 0 of 2
Test
1. Driver's Door Panel - Remove
2. Driver's Power Tailgate Switch - Test


- Disconnect the connector (A).
- Check the driver's power tailgate switch (B) for continuity and voltage according to the table.
NOTE:
- When an LED is located between terminals, check if the LED lights up by connecting power and ground to the LED.
- Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).
- If the continuity is not as specified, replace the driver's power tailgate switch.
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?