Front Door Latch Removal and Installation
In this manual: Front Door Latch Removal and Installation
7steps
~42min
2/5difficulty
Done 0 of 7
Removal/Installation
1. Front Door Panel - Remove
2. Front Door Plastic Cover - Remove (as needed)
3. Front Door Panel Barrier B - Remove (For Some Models)
4. Front Door Inner Handle - Remove

- Disconnect the inner handle cable (A) and the latch cable (B) from the inner handle (C).
5. Front Door Center Lower Channel - Remove

- Pull the glass run channel (A) away as needed.
- Remove the front door center lower channel (B).
6. Front Door Latch - Remove

- Remove the bolts with a TORX T30 bit.
- Driver's side: Pull and rotate the front door latch (A) to disconnect the cylinder rod (B).
- Pull the front door latch downward to disconnect the outer handle rod (C), and then remove the front door latch.
NOTE: Be careful not to bend the cables (D).

- Open the latch protector cover (A).

- Disconnect the inner handle cable (A) and the latch cable (B) from the front door latch (C).
7. All Removed Parts - Install
- Install the parts in the reverse order of removal.

Was this page helpful?