Power Tailgate Inside Switch Test
In this manual: Power Tailgate Inside Switch Test
2steps
~12min
1/5difficulty
Done 0 of 2
1. Power Tailgate Inside Switch Panel - Remove
2. Power Tailgate Inside Switch - Test

- Check for continuity between the terminals in each switch position according to the table.
NOTE:
- When an LED is located between terminals, check if the LED lights up by connecting power and ground to the LED.
- Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).
- If the continuity is not as specified, replace the power tailgate inside switch (A).
3. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?