Rear Stabilizer Bar Removal and Installation
In this manual: Rear Stabilizer Bar Removal and Installation
3steps
~18min
2/5difficulty
Done 0 of 3
Removal/Installation
1. Vehicle - Lift
2. Rear Wheels - Remove
3. Spare tire - Remove
4. Stabilizer Link - Disconnect
- Disconnect both sides of the stabilizer link from the stabilizer bar.
5. Stabilizer Bar - Remove

- Remove the bushing holders (A).
NOTE: Use the new flange bolts during reassembly.
- Remove the bushings (B).
- Remove the stabilizer bar (C).
6. All Removed Parts - Install
- Install the stabilizer bar in the reverse order of removal, and note these items:
- Note the right and left direction of the stabilizer bar.
- Refer to stabilizer link removal/installation to connect the stabilizer bar to the links
- Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.
7. Wheel Alignment - Check
Was this page helpful?