Rear Bumper Skid Trim Removal and Installation
In this manual: Rear Bumper Skid Trim Removal and Installation
4steps
~24min
2/5difficulty
Done 0 of 4
Removal/Installation
1. Rear Bumper - Remove
2. Subharness - Remove

- Disconnect the connectors (A). (for some models)
- Remove the subharness (B).
3. Back-up light - Remove
4. Rear Bumper Skid Trim - Remove
Without Rear Bumper Trim

- Remove the screws and the clips.
- Release the hooks (A) from the back of the rear bumper (B), and then remove the rear bumper skid trim (C).
With Rear Bumper Trim

5. All Removed Parts - Install
- Install the parts in the reverse order of removal.
Was this page helpful?